top of page

Implementación de Planes Nacionales de Adaptación

Público·24 miembros

How to Fix Bootloop Problem on Android Tablet A20 GT90x v4


How to Fix Bootloop Problem on Android Tablet A20 GT90x v4




If you have an Android tablet with the model number A20 GT90x v4, you may encounter a bootloop problem where the device gets stuck on the boot screen and does not start normally. This can be caused by various reasons, such as a corrupted system file, a faulty app, a virus infection, or a failed firmware update. Fortunately, there are some ways to fix this problem and restore your tablet to normal operation.


gt90x a20 firmware



In this article, we will show you how to fix the bootloop problem on your Android tablet A20 GT90x v4 by flashing a new firmware using your PC. This method requires some technical skills and tools, so please follow the steps carefully and at your own risk.


What You Need




  • A Windows PC with a USB port.



  • A USB cable compatible with your tablet.



  • A firmware file for your tablet. You can download it from here. The file name is 9inch A20 PH GT90X.zip and it has a size of 292.19 MB.



  • A flashing tool for your tablet. You can download it from here. The file name is PhoenixSuitPacket_v1.0.6.zip and it has a size of 16.8 MB.



  • A driver for your tablet. You can download it from here. The file name is AllwinnerA20_usb_driver.zip and it has a size of 8.3 MB.



What You Do




  • Extract the firmware file, the flashing tool, and the driver to separate folders on your PC.



  • Install the driver on your PC by running the DriverInstall.exe file in the driver folder.



  • Run the PhoenixSuit.exe file in the flashing tool folder as administrator.



  • Connect your tablet to your PC using the USB cable. Make sure your tablet is powered off.



  • Press and hold the volume up button on your tablet and then press the power button for a few seconds until you see a prompt on your PC asking you to upgrade the firmware.



  • Click Yes on the prompt and then browse to the firmware folder and select the img file.



  • Click Yes again to confirm and wait for the flashing process to complete. It may take several minutes.



  • When the flashing is done, you will see a green tick mark on your PC indicating success.



  • Disconnect your tablet from your PC and reboot it. It should start normally now.



Conclusion




In this article, we have shown you how to fix the bootloop problem on your Android tablet A20 GT90x v4 by flashing a new firmware using your PC. This method should work for most cases, but if you still encounter any issues, you may need to contact the manufacturer or a professional technician for further assistance. We hope this article was helpful and informative for you. 0efd9a6b88


https://www.branchoutafrica.com/group/mysite-200-group/discussion/084dbcb0-eaf8-4ddb-b8b8-5836ddf946f7

https://www.fastsocceracademy.com/group/elkhart-saturday-morning-clinics/discussion/18ffeae6-c231-4fbc-893f-6ed7d237b83d

https://www.karatepraha.com/group/young-ninja-group-ages-3-5/discussion/d8222df2-b99c-4698-b43e-1bd3d33530ac

Acerca de

Trabajo colaborativo para intercambiar puntos de vista y not...

Miembros

bottom of page